Specifications

Solved Problems:
1. General autorecovery problem (in cases where a S-LAU was attached to an RR-SAT ) -
Solved.
2. Autorecovery with TL2F/SAT modules - Fixed.
3. Problem of bad CML/IB performance in case of large broadcast traffic - Now corrected.
4. Autorecovery in rings which contain segments with or without autorecovery features
(e.g. S-TAU). Also, Autorecovery in segments with satellite or in segment-satellite - Fixed.
Versions Compatibility:
RR-CML-NM RR-CML-IB/T RR-CML-IB/E RR-TRE RR-MLB-T RR-FTB RADview
S/W Ver. 8.05
H/W Rev. 4.00
S/W Ver. 5.04 / 5.05
H/W Rev. 0.0 C/D
S/W Ver. 1.04 / 1.05
H/W Rev. 1.0
S/W Ver 5.02 S/W Ver 1.20 S/W Ver 1.31 S/W Ver 3.1/4.0
S/W Ver. 7.03
H/W Rev. 3.1f or later
S/W Ver. 4.03
H/W Rev. RR-TRE-1.0
N/A S/W Ver. 2.000g or later
S/W Ver. 4.01/5.0
S/W Ver. 1.10/1.12 S/W Ver. 1.20 S/W Ver. 3.1
S/W Ver. 6.01
H/W Rev. 3.1f or later
S/W Ver3.01/02
H/W Rev. RR-TRE-1.0
N/A S/W Ver. 2.000g or later
S/W Ver. 4.01/5.0
N/A N/A S/W Ver. 2.02
S/W Ver. 5.20
H/W Rev. 3.1f or later
S/W Ver. 2.0
H/W Rev. RR-TRE-1.0
N/A S/W Ver. 2.000g or later
S/W Ver. 4.01/5.0
N/A N/A S/W Ver. 1.01
S/W Ver. 4.60 S/W Ver. 1.0 N/A S/W Ver. 1.20 N/A N/A RADNet Ver. 3
• Old Ethernet module firmware works with the new version but without statistic/security
features.
• The various versions were designed to work together with RADview 4.0 management
station. However, they are compatible with RADview 3.0.
• Versions 1.05 (CML-IB/E) and 5.05 (CML-IB/T) are identical to versions 1.04 and 5.04
respectively. They have been designed to comply with a new hardware component.