Specifications

Installation and Operation Manual Appendix C IR-IP Interface Module

ASMi-31 Ver. 3.0 Device Control Menu C-23

View Error Log Screen

This item of the Device Control submenu is used to view the error log file. This

file logs errors detected in IR-IP for debug and technical support purposes.

Resets Menu

The Resets menu allows you to perform reset of IR-IP, or its interfaces.

This operation can be used to restore normal operation after service is disrupted

by an abnormal condition. Any data stored in the IR-IP buffers is discarded, and

the flow of traffic is temporarily interrupted.

 To access the Resets menu:

• From the Device Control menu, type 3.

The following screen appears:

IR_IP <IR-IP> S/W Ver. 1.00 31/IR (date)

Quick Setup

Management Access

Advanced Setup

Device Control

.....................................................................

New Software Download

View error LOG

Resets

=====================================================================

1. Reset Device

2. Reset LAN

3. Reset WAN

Press one of the numbers to select or ESC:

Figure C-18. Resets Menu

Reset Device

 To restart IR-IP:

• From the Resets menu, type 1.

You will be prompted to confirm the reset operation.

Resetting the device will restart the IR-IP interface module, and therefore traffic

flow is temporarily interrupted, and the Telnet connection is lost.

Reset LAN

 To reset the LAN interface:

• From the Resets menu, type 2.

You will be prompted to confirm the reset operation.

Note