Specifications

Installation and Operation Manual Chapter 3 Operation
ASMi-31 Ver. 3.0 Turning ASMi-31 Off 3-5
parameters of the remote unit. This menu is active only when a line or DTE
configuration mismatch occurs between the two units. For more details, refer
to
Chapter 5 .
This command is not active, if the modems are not synchronized to the same
clock.
• LINE CONFIG – configures of the line parameters.
• DTE CONFIG – configures both local and remote modem DTE parameters.
• TESTS – executes several diagnostic tests on the local and remote modems.
If there are alarms stored in the alarm buffer, the device returns to the ALARM
BUFFER screen and display the highest priority alarm in the buffer in the menu
options field.
The LINE CONFIG and DTE CONFIG menus are not available when any of the
diagnostic tests is running.
3.5 Turning ASMi-31 Off
To turn off ASMi-31, remove the power cord from the power source.
Note
Note