Specifications

Quick Start Guide Installation and Operation Manual
2 Configuring ASMi-31 ASMi-31 Ver. 3.0
clock reference, transmission mode, data format for asynchronous transmission
and operating data rate. Configuration must be performed for the local and
remote modems.
Selecting the Clock Mode
You must select the clock mode for both local and remote modem.
 To select clock mode:
• Scroll to CLKTYPE under LINE CONFIG and select the desired clock type of the
modems (INT RCV, EXT RCV, RCV INT, or RCV EXT).
Selecting the Transmission Mode
You must select transmission mode for the modem (synchronous or
asynchronous).
 To select transmission mode
• Scroll to MODE under DTE CONFIG and select the desired transmission mode
(SYNC or ASYNC).
Selecting the Data Format
If you are using asynchronous transmission, you must select the data format
(number of data bits, parity type and number of stop bits).
 To select data format:
• Scroll to FORMAT under DTE CONFIG and select the desired data format.
Selecting the Data Rate
You must select the operation data rate.
 To select data rate:
• Scroll to DATARATE under DTE CONFIG and select the desired bit rate.