Specifications

Chapter 3 Operation Installation and Operation Manual
3-2 Operating ASM-61 ASM-61 Ver. 1.0
3.2 Operating ASM-61
Turning On ASM-61
ASM-61 is turned on as soon as the power is connected to the unit. The PWR
indicator lights up and remains lit as long as ASM-61 receives power.
Normal Operation
Always operate ASM-61 in pairs: ASM-61/CO opposite ASM-61/CPE.
ASM-61 units operate with the constant line rate (10 Mbps) and preset timing
modes (ASM-61/CO – internal, ASM-61/CPE – received).
If a DTE attached to ASM-61 does not support autonegotiation, the modem
automatically switches to half duplex mode at 10 Mbps or 100 Mbps.
ASM-61 requires no operator attention once installed and powered up, with the
exception of occasional monitoring of front panel indicators.
Turning Off ASM-61
To turn off ASM-61, remove the power cord from the power source.
Note