Specifications

ASM-61 Ver. 1.0 Package Contents 2-1
Chapter 2
Installation
This chapter describes installation and setup procedures for the standalone
ASM-61 modem.
After installing the unit, refer to Chapter 3 for the operating instructions.
Internal settings, adjustment, maintenance, and repairs may be performed
only by a skilled technician who is aware of the hazards involved.
Always observe standard safety precautions during installation, operation, and
maintenance of this product.
Before installing the product, review Handling Energized Products at the beginning
of the manual.
2.1 Site Requirements and Prerequisites
ASM-61 has a combined AC/DC power supply. Units should be installed within
1.5m (5 ft) of an easily accessible grounded AC outlet furnishing 100 VAC to
240 VAC or DC power source of –48 VDC.
For instructions on connecting ASM-61 to a DC power source, see the DC Power
Supply Connection Supplement.
Allow at least 90 cm (36 in) of frontal clearance for operating and maintenance
accessibility. Allow at least 10 cm (4 in) clearance at the rear of the unit for signal
lines and interface cables.
The ambient operating temperature of ASM-61 is 0 to 50°C (32 to 122°F) at
relative humidity of 90%, non-condensing.
2.2 Package Contents
The ASM-61 package includes the following items:
• One ASM-61 unit
• Last Mile Access and Intelligent Modems CD
• AC/DC power cord.
Warning
Note