Specifications

ASM-10/8 Installation and Operation Manual Chapter 3 Operation
Operating ASM-10/8 3-3
Normal Indications
Table 3-2 shows the correct status of the ASM-10/8 indicators after the local and
remote modem are synchronized and data is being transferred.
Table 3-2. ASM-10/8 Indicator Status
Indicator Status
PWR ON
RTS ON
TD Blinking or OFF
RD Blinking or OFF
DCD ON
ERR OFF
TEST OFF
If the LEDs do not reflect the above status, ensure that:
• One modem is set to internal or external clock, and the other to receive clock.
• The four front-panel pushbuttons are in the OFF position.
Turning Off ASM-10/8
To turn off the modem, remove the power cord from the power source.