Specifications

ASM-10/8 Installation and Operation Manual Chapter 1 Introduction
Physical Description 1-5
1.2 Physical Description
ASM-10/8 is available as a standalone desktop unit or as a card for the
ASM-MN-214 modem rack. Figure 1-5 shows the 3D view of the ASM-10/8
standalone unit.
Figure 1-5. ASM-10/8, 3D View
The front panel includes six LEDs, which display the status of power, data flow,
control signals and diagnostics. Three front-panel switches control the three
loopback modes. For detailed description of the front panel, see Chapter 3.
The back panel includes an AC cord connector with fuse, an interface connector,
and a terminal block with a ground connection for connecting the telephone lines.
The ASM-10/8 rear panel is described in greater detail, in Chapter 2.
The internal switches and jumpers can be configured to support a variety of modes
for operating the modem. Refer to Chapter 2 for details on jumper location and
setting.