Specifications

Quick Start Guide ASM-10/8 Installation and Operation Manual
4 Operating ASM-10/8
Connecting the Power

To connect AC power to ASM-10/8:
1. Connect the power cable to the power connector on the ASM-10/8 rear panel.
2. Connect the power cable to the mains outlet.
The unit turns on automatically upon connection to the mains.

To connect DC power to ASM-10/8:
• Refer to DC Power Supply Connection Supplement.
2. Operating ASM-10/8
ASM-10/8 does not require operator attention once installed and configured.
Verifying Performance
When data is being transferred, observe that the following front panel LEDs light or
blink:
• PWR: On
• RTS: On
• TD: Blinking or Off
• RD: Blinking or Off
• DCD: On
• TEST: Off.