Owner`s manual

I/O Modules
5-4
Figure 5-4 provides an exploded view of the TB holder assembly.
Figure 5-4 Terminal Block (TB) Holder Assembly – Exploded View with Coding
Attaching the TB Holder Clip to the I/O Module
An optional TB holder clip can be added to the I/O module to secure the cable.
Procedure 5-2 Attaching the TB Holder Clip to the I/O Module
1) Remove the I/O module from the ACE3600 RTU.
2) Using the supplied screw, attach the TB holder clip to the bottom of the I/O module. (see
Figure 5-5)