Owner`s manual

Installation
2-3
117
209
124
82
234
199.6
124
244
0 I/O Frame 3 I/O Frame
Figure 2-2. No I/O and 3 I/O Frame Installation Dimensions and Screw Holes for
Installation
278.5
314
244
124
391
356.9
244
124
5 I/O Frame 7 I/O Large Frame
Figure 2-3. 5 I/O and 7 I/O Frame Installation Dimensions and Screw Holes for
Installation
The following screw mount installation procedure should be used to install all ACE3600
frames (with or without a metal chassis) on a wall, except the 8 I/O (19”) frames.
Procedure 2-1 How to Mount the RTU Frame on a Wall
1) Drill four holes in the wall at the horizontal and vertical distances shown in Figure 2-1 and
Figure 2-2.
2) Insert M4 screws (not supplied) with head size DIN 7981C/ST4, 2x38mm into the holes.
3) Remove the modules from the frame.
4) Lift the RTU frame and hang over the four screws.
5) Remove the outermost modules in order to access the screws.