Owner`s manual

Radio Types and Installation Kits
11-31
Figure 11-28 CM/EM/GM Radio Cable Connections
4. Connect the communication cable (FKN8427A) to the back of the radio adapter
(FLN3636A) connector (10-pin RJ45 connector). (See Figure 11-28.) Add a Fair-Rite soft
ferrite (#7683477X01) to the cable near the bottom of the CPU door, and connect the other
end of the communication cable to the plug-in port of the ACE3600 CPU.
5. Mount the CM/EM/GM radio onto the metal bracket (#0789422V45) using the two
supplied radio mounting screws from kit FHN6894A, # 0387839V89 on the top and
bottom of the radio. (See Figure 11-27, Figure 11-28 and Figure 11-29.)
6. Connect the antenna cable (FKN8429A/FKN8430A
*
) to the antenna connector on the radio
and to the opening on the bottom of the ACE3600 housing using the four supplied screws.
(See Figure 11-28 and.) Mount the complex (bracket and radio) on the RTU chassis above
the CPU and I/O modules, using the four built-in screws. (See Figure 11-29.)
*
Antenna Cable FKN8429A with UHF connector is for Latin and North America.
Antenna Cable FKN8430A with BNC connector is for Asia and Europe.
Communication
Cable
(
FKN8427A)
Antenna
Connector
Antenna Cable
(
FKN8429A/
FKN8430A
*
)
Radio
Adapter
Power
Connector
Radio
Power Cable
(
FKN8428A)