Owner`s manual

Radio Types and Installation Kits
11-30
CM/EM/GM Radio Installation Kit
The CM/EM/GM Installation Kit for ACE3600 (V148AC/FLN3635A) enables the user to
install the CM/EM/GM mobile radio (CM200, CM140, EM200, GM3188) in ACE3600
Remote Terminal Units (RTU). Each kit includes a bracket, adapter, and cables.
Installation
The CM/EM/GM can be mounted on the ACE3600 RTU as follows:
Procedure 11-16 How to Install the CM/EM/GM Radio on the Metal Chassis
1. Attach the radio plug-in port from the installation kit (FLN3696A) to the desired opening
on the ACE3600 CPU module. For instructions on attaching plug-in ports, see Connecting
Plug-In Ports to the CPU Module in the CPU Module chapter above.
2. Connect the 16-pin connector radio adapter (FLN3636A) to the accessory connector on the
radio. (See Figure 11-27.)
Figure 11-27 CM/EM/GM Radio, Adapter and Power Cable
3. Connect the power cable (FKN8428A) to the radio’s power connector. (See Figure 11-27
and Figure 11-28.) Connect the other side of the power cable to the AUX2A or AUX2B
connector on the ACE3600 RTU Power Supply unit. (See Figure 11-29.)
Power Cable
(
FKN8428A)
Radio
Bracket
(
FHN6894A)
Mounting Screws
(
0387839V89)
Radio
Adapter