Owner`s manual

Radio Types and Installation Kits
11-27
Figure 11-24 GP/HT/PRO Radio Installation
7. Using the two screws, attach the radio assembly to the radio bracket (FHN6899A).
8. Using the three screws on the bracket, attach the bracket with the radio to the chassis of the
ACE3600. (See Figure 11-25.)
9. Connect the audio communication cable (FKN8431A) from the audio adapter (attached to
the radio) to the desired plug-in port on the front panel of the CPU module.
10. Connect the DC power cable (FKN8433A) from the DC adapter (attached to the radio) to
the AUX2A or AUX2B connector of the power supply module.
11. Route the antenna cable (FKN8434A) from the bottom of the RTU box to the BNC adapter
on the radio.
12. Use the clamps provided in the kit to route and secure the audio communication and DC
power cables. (See Figure 11-25.)
1
2
3
4
Fit radio into
adapter
base and
press radio
to adapter.
5