Owner`s manual

Radio Types and Installation Kits
11-15
CDM750 Radio Installation Kit
The CDM750 radio installation kit (ACE3600 option V143AH/kit FLN3638A) enables the
user to install the CDM750 radio series in ACE3600 Remote Terminal Units (RTU). The
FLN3638A installation kit includes a bracket, adapter, and cables.
Installation
The CDM750 radio can be mounted on the ACE3600 RTU as follows:
Procedure 11-9 How to Install the CDM750 Radio on the Metal Chassis
1. Attach the radio plug-in port from the installation kit (FLN3696A) to the desired opening
on the ACE3600 CPU module. For instructions on attaching plug-in ports, see
Connecting Plug-In Ports to the CPU Module in the CPU Module chapter above.
2. Connect the radio adapter (FLN3639A) 16-pin connector to the radio Accessory
connector (See Figure 11-8.)
3. Connect the power cable (FKN8436A) to the radio power connector, and the opposite
side of the cable to the AUX2A or AUX2B connector on the ACE3600 power supply
module.
4. Connect the communication cable (FKN8427A) to the rear connector (8-pin RJ45
connector) of FLN3639A. Connect the opposite side of the cable to the plug-in port on
the CPU module.
Figure 11-8 CDM750 Antenna, Power and Communication Cable Connections
Radio
Adapter
(
FLN3639A)
Power
Connector
Antenna
Connector
Power Cable
(
FKN8436A)
Communication
Cable (FKN8427A)
Antenna Cable
(FKN8437A)