Owner`s manual

Radio Types and Installation Kits
11-5
Figure 11-2 XTL5000 Radio Cable Connections- Rear View
5. Mount the bracket on the RTU chassis above the CPU and I/O modules, using the four
built-in screws. (See Figure 11-4.) The wider side of the bracket is attached to the
chassis.
6. Connect the antenna cable (FKN8437A) to the Antenna connector on the XTL5000. Run
the cable through the small white clips along the edge of the chassis and attach the
connector to the opening on the bottom of the ACE3600 RTU housing. (See Figure 11-2
and Figure 11-4.)
Figure 11-3 XTL5000 Radio Bracket with Four Bracket Mounting Screws
Bracket
Mounting
Screws
Radio
Bracket
(
#0789422V41)
Power Cable
(
FKN8436A)
Antenna Cable
(
FKN8437A)
Signal Cable
(
FKN8432A/
FKN8438A
)
Radio Antenna
Connector
Radio Power
Connector
Radio Accessory
Connector