Owner`s manual

Mixed I/O Module
10-7
Diagnostics LEDs LED per each DO and DI.
Overflow and Underflow LED per each AI.
AI Overflow and Underflow levels can be configured to:
Current inputs: ±20mA / 4-20 mA
Voltage inputs: ±5 V / 0-5 V /1-5 V
24 V DC output Supports one isolated 24V / 0.35 A plug-in “wetting” power
supply
User Connection 4 Terminal Blocks (3.5mm pitch), Maximum 18 AWG
Cable and TB Holder 40 wire cable with Terminal Block Holder connector, 26 AWG
Module replacement Hot swap replacement– module extraction/insertion under
voltage
Input / Output Isolation DI: 2.5 kV DC/AC between input and module logic
per IEC255-5
DO: Between open contacts: 1kV, between contact and coil:
1.5 kV, between contact sets: 1.5 kV
AI: 1.5 kV between input and module logic
Input Insulation Insulation resistance 100 MΩ @ 500 V DC per IEC255-5
Operating Voltage 10.5-15.5 V DC and 3.3 V DC (from the motherboard
connector)
Power Consumption 0.1 W Typical,
EE: 1.3 W max. (all relays and LEDs on),
ML: 0.8 W max. (all LEDs on)
(not including Plug-in 24 V Power Supply)
Dimensions 37 mm W x 225 mm H x 180 mm D
(1.5" W x 8.7" H x 7.1" D)
Weight Approx. 0.31 Kg (0.68 lb)
Specifications subject to change without notice.