User`s manual

5620 Model Descriptor for LA-110 User’s Manual Chapter 4 Port Configuration and Monitoring
SHDSL Port Configuration 4-47
Table 4-24. SHDSL Port – ATM Layer VCL Table Parameters
Parameter Remarks
Port The selected port
SHDSL
Read-only
Type The protocol application which runs above the physical port.
ATM
Read-only
VCL Table
VPI
0..31
VCI
0..255
Last Change This field indicates the time of the last change on the port.
Read-only
Oper. Status The actual link status.
Up, Down
Read-only
Traffic
Descriptor
The Traffic Descriptor.
1…200
Read-only
Continuity
Check
The VCC admin status.
Off-two-way (down), On-two way (up), On-source, On-sink
Read-only
AAL Type The type of AAL used on this VCC.
AAL1, AAL5
Read-only
Relevant only when the local VCL end-point is also the VCC end-point, and AAL is in use.