User`s manual

Chapter 4 Port Configuration and Monitoring 5620 Model Descriptor for LA-110 User’s Manual
4-46 SHDSL Port Configuration
Table 4-23. SHDSL Port – ATM Layer Parameters (Cont.)
Parameter Remarks
OAM
Mode OAM support mode, which determines the interface's location in a segment.
Segment, End-to-end
Failure
Indication
The OAM failure indication.
Disabled, AIS and RDI
VCL Table
To configure SHDSL port ATM layer VCL table parameters:
1. In the LA-110 Node Draw, select the SHDSL port, right-click and select
Configure > ATM Layer > VCL Table.
Figure 4-33. SHDSL Port – ATM Layer VCL Table
2. Fill in the fields, as described in Table 4-24.
3. Click <Save> to save the changes.