User`s manual

5620 Model Descriptor for LA-110 User’s Manual Chapter 4 Port Configuration and Monitoring
SHDSL Port Configuration 4-43
Table 4-22. SHDSL Port – ATM Layer Interface Information Parameters
Parameter Remarks
Port The selected port
SHDSL
Read-only
Type The protocol application which runs above the physical port.
ATM
Read-only
Oper. Status The actual link status.
Up, Down
Read-only
MTU (byte) The size of the largest packet which can be sent/received on the interface, specified in
octets. For interfaces that are used for transmitting network datagrams, this is the size of
the largest network datagram that can be sent on the interface
Integer
Read-only
Max CPS SDU
Size
The maximum AAL5 CPCS SDU (service data unit) size in octets that is supported on the
transmit direction of this VCC.
Read-only
Relevant only when the local VCL end-point is also the VCC end-point, and AAL5 is in
use.
Available only for AAL Type = AAL5
Last Change This field indicates the time of the last change on the port.
Read-only