User`s manual

Chapter 4 Port Configuration and Monitoring 5620 Model Descriptor for LA-110 User’s Manual
4-34 LAN Port Configuration
2. Fill in the fields, as described in Table 4-18.
3. Click <Save> to save the changes.
Table 4-18. Add Bridge Ports (VLAN Aware) Parameters
Parameter Remarks
Number The interface number.
1…16
The NMS will NOT display Bridge Ports that currently exist for this Bridge.
Physical Port The physical port.
ATM
The NMS will NOT display a value when all the possible Bridge Ports of this Type
(Physical Port) currently exist.
The default value is the first selectable value (according to the mentioned order).
PVID The VLAN ID assigned to untagged frames or Priority-Tagged frames received on this
port
1 (default)...4094
Ingress Filtering Determines whether incoming frames are discarded or accepted by the port.
Enable: enables ingress filtering and the device discards incoming frames for VLANs
which do not include this Port in its Member set
Disable: disables ingress filtering, the port accepts all incoming frames.
Acceptable
Frame Type
Determines whether untagged or Priority-tagged frame are received or discarded by the
port.
All: untagged frames or Priority-tagged frames received on this port are accepted and
assigned to the PVID for this port.
Only VLAN Tagged: the device discards untagged frames or Priority-tagged frames
received on this port.
Deleting Bridge Ports

To delete a bridge port:
• In the LA-110 Navigator, select a Bridge port object (VLAN Aware), and on
the Object menu, click <Delete>.
The selected Bridge object is deleted.
Configuring Bridge Port Parameters

To configure bridge port parameters:
1. In the LA-110 Navigator, select a Bridge port object (VLAN Unaware), right-click
and select Configure > Parameters.