User`s manual

5620 Model Descriptor for LA-110 User’s Manual Chapter 4 Port Configuration and Monitoring
LAN Port Configuration 4-31
2. Fill in the fields, as described in Table 4-16.
The maximum number of VLANs members in all VLANs is 100. In LA-110,
whenever you add a VLAN, you also assign a member in the same
operation, where the maximum number of allowed VLANs is 100.
However, if more then one member is assigned to a VLAN, the number of
maximum VLANs decreases accordingly.
3. Click <Save> to save the changes.
Table 4-16. Bridge Port (VLAN Aware) VLAN Members Parameters
Parameter Remarks
VLAN ID The VLAN-ID or other identifier referring to this VLAN.
1…4094
Read-only
VLAN Name The VLAN user-defined or default name.
Read-only
Bridge Port The Bridge Ports that currently exist.
ATM: ports 1…16
Ethernet: port 9
Read-only
Tx Frame Type The transmitted frame type of the VLAN member.
Untagged, Tagged (default)
Read-only
Bridging Table
This menu option is enable only for VLAN Unaware bridges.
To view Bridging Table parameters:
1. In the LA-110 Navigator, select the Bridge port (VLAN Aware), right-click and
select Configure > Bridging Table > View.
Figure 4-24. Bridge Port (VLAN Unaware) View Bridging Table
Note