User`s manual

Chapter 4 Port Configuration and Monitoring 5620 Model Descriptor for LA-110 User’s Manual
4-30 LAN Port Configuration
Table 4-15. Bridge Port (VLAN Aware) Select VLAN for Membership Parameters
Parameter Remarks
VLAN ID The VLAN-ID or other identifier referring to this VLAN.
1…4094 (of the existing VLANs)
The default is the last selected VLAN.
In order to open the VLAN Members window, the VLAN ID field has to be changed,
otherwise the form will not be aware of any change and nothing will happen.
Therefore, whenever the dialog is opened with the value of the desired VLAN ID,
you can simply open the VLAN Members window directly.
VLAN Members
This menu option is disabled if no VLAN is defined.
In the VLAN Members window, you can add or remove members from a selected
VLAN.
The VLAN ID that will be opened, will be the one that is configured in the Select
VLAN for Members window
To configure VLAN members:
1. In the LA-110 Navigator, select the Bridge port (VLAN Aware), right-click and
select Configure > VLAN Members.
Figure 4-23. Bridge Port (VLAN Aware) VLAN Members
Note
Note