User`s manual

Chapter 4 Port Configuration and Monitoring 5620 Model Descriptor for LA-110 User’s Manual
4-28 LAN Port Configuration
3. Click <Yes> to confirm.
The entire LAN Table is erased.
VLAN Table
VLAN can be used to provide separation between traffic from different sources
sharing the same physical transmission facilities, and to provide information on the
relative priority the assigned to each frame. The characteristics and use of virtual
LANs (VLANs) and of the MAC bridges capable of handling tagged frames are
defined in IEEE Standard 802.1Q.
This menu option is available only for VLAN Aware bridge ports.

To configure VLAN Table parameters:
1. In the LA-110 Navigator, select the Bridge port (VLAN Aware), right-click and
select Configure > VLAN Table.
Figure 4-21. Bridge Port (VLAN Aware) VLAN Table
2. Fill in the fields, as described in Table 4-14.
3. Click <Save> to save the changes.
When Bridge mode is VLAN Aware, the procedure of VLAN creation is as follows:
1. In the VLAN Table dialog, select Table > Add Row.
2. In the VLAN Table, in the VLAN ID field, edit the VLAN
ID.
3. In the VLAN Table, select the Bridge Port which will be
a member in the VLAN
4. In the VLAN Name field, edit the VLAN Name. If the
VLAN Name is not edited, the VLAN will be given a
default name.
Note