User`s manual

5620 Model Descriptor for LA-110 User’s Manual Chapter 4 Port Configuration and Monitoring
LAN Port Configuration 4-27
Figure 4-19. Bridge Port (VLAN Aware) LAN Table – Static Parameters
2. Fill in the fields, as described in Table 4-13.
If the number of static LAN entries added, exceeds the limit, the following
message appears on the Status bar: "The number of Static LAN entries
cannot exceed 32."Set won't be performed."
3. In the LAN Static Table dialog, select Table > Add Row.
4. In the Static Table, in the VLAN ID field, edit the VLAN ID.
5. In the Static Table, select the Bridge Port which will be a member in the VLAN.
6. In the MAC Address field, enter the MAC address.
7. Click <Save> to save the changes.
Removing All LAN Table Entries

To remove all LAN Table entries:
1. In the LA-110 Navigator, select the Bridge port (VLAN Aware), right-click and
select Configure > LAN Table > Remove All Entries.
Figure 4-20. Bridge Port (VLAN Aware) LAN Table > Remove All Entries
2. In the Action field, select <Remove All Entries>.
A confirmation message dialog appears: "Erasing LAN Table. Information
will be lost."