User`s manual

Chapter 4 Port Configuration and Monitoring 5620 Model Descriptor for LA-110 User’s Manual
4-26 LAN Port Configuration
Figure 4-18. Bridge Port (VLAN Aware) LAN Table
Table 4-13. Bridge Port (VLAN Aware) LAN Table Parameters
Parameter Remarks
VLAN ID The Bridge port VLAN-ID.
1…4094
Read-only
Bridge Port Bridge Port selection is possible only for a new entry.
• ATM: ports 1…16
• Ethernet: port 9
Read-only
MAC Address The MAC Address format.
Read-only
Type Provides information about all entries, learned dynamically or statically configured by
management, in each filtering database.
• Learned: Created by self-learning of the bridge
• Static: user-created
Read-only
Adding Static LAN Entries
You can add static MAC addresses to the bridging table of the LA-110 LAN port.
You may define up to 32 static MAC addresses. If this number is exceeded, you
must delete an existing MAC address before a new one can be added.

To add static LAN entries:
1. In the LA-110 Navigator, select the Bridge port (VLAN Aware), right-click and
select Configure > LAN Table > Static.