User`s manual

5620 Model Descriptor for LA-110 User’s Manual Chapter 4 Port Configuration and Monitoring
LAN Port Configuration 4-23
Table 4-11. LAN Port Interface Information Parameters (Cont.)
Parameter Remarks
MTU (byte) The size of the largest packet which can be sent/received on the interface, specified in
octets. For interfaces that are used for transmitting network datagrams, this is the size of
the largest network datagram that can be sent on the interface
Integer
Read-only
MAC Address The interface's MAC address at its protocol sub-layer.
MAC address format
Read-only
Last Change This field indicates the time of the last change on the port.
Read-only
Mode The port mode of operation.
Full Duplex, Half Duplex
Read-only
Rate (Mbps) The operation rate of the port.
10, 100 Mbps
Read-only
Status The port status.
Connected, Not Connected
Read-only
Bridge Configuration
In the Navigator, you can view and modify LAN port Bridge parameters.
Basic tasks include viewing and configuring:
• Bridge parameters
• LAN table parameters
• VLAN table parameters
• VLAN for membership
• VLAN members
• Bridging table.