User`s manual

5620 Model Descriptor for LA-110 User’s Manual Chapter 4 Port Configuration and Monitoring
Data Port Configuration 4-15
Table 4-6. AAL1 Stream Interface Information Parameters
Parameter Remarks
Port The selected port
Read-only
Type The protocol application which runs above the physical port.
AAL1 Stream
Read-only
Interface The interface type.
X.21, V.35, V.36
Read-only
Data Mode The data mode.
NRZ1, NRZ
Read-only
Oper. Status The actual link status.
Up, Down
Read-only
C-Circuit
N/A Not Active, Active
Read-only
I-Circuit
N/A, Not Active, Active
Read-only
Last Change This field indicates the time of the last change on the port.
Read-only
Interface Parameters

To configure AAL1 Stream interface parameters:
1. In the LA-110 Node Draw, select the Data port, right-click and select Configure
> AAL1 Stream Interface > Interface Parameters.