User`s manual

Chapter 4 Port Configuration and Monitoring 5620 Model Descriptor for LA-110 User’s Manual
4-12 Data Port Configuration
Table 4-4. FR Interface VC Signaling Information Parameters (Cont.)
Parameter Remarks
User-Side
N391 Polling
Cycle
1..255
Read-only
N392 Polling
Cycle
1..10
Read-only
N393 Polling
Cycle
1..10
Read-only
T391 Link
Integrity Polling
Timer
5..30
Read-only
Loopback Testing

To configure Data Port - FR interface loopback testing:
1. In the LA-110 Node Draw, select the Data port, right-click and select Configure
> FR Interface > Loopback Test.
Figure 4-9. FR Interface Port Loopback State
2. Fill in the fields, as described in Table 4-5.
3. Click <Save> to save the changes.