User`s manual

5620 Model Descriptor for LA-110 User’s Manual Chapter 4 Port Configuration and Monitoring
Data Port Configuration 4-9
Figure 4-7. FR Interface Parameters
2. Fill in the fields, as described in Table 4-3.
3. Click <Save> to save the changes.
If the data rate was changed, a confirmation message dialog appears:
“Data Rate change requires device reset. Operation will RESET the Device.
Do You Wish to Continue?” Click <Yes> to confirm.
If the CRC value was changed, a confirmation message dialog appears:
“CRC change requires device reset. Operation will RESET the Device. Do
You Wish to Continue?” Click <Yes> to confirm.
Table 4-3. FR Interface Parameters
Parameter Remarks
Port The selected port
Read-only
Type The protocol application which runs above the physical port.
Frame Relay
Read-only