User`s manual

Chapter 4 Port Configuration and Monitoring 5620 Model Descriptor for LA-110 User’s Manual
4-8 Data Port Configuration
Table 4-2. FR Interface Information Parameters (Cont.)
Parameter Remarks
Clock Mode Indicates the clock used for synchronization for the data port.
DCE
Read-only
Oper. Status The actual link status.
Up, Down
Read-only
MTU (byte) The size of the largest packet which can be sent/received on the interface, specified in
octets. For interfaces that are used for transmitting network datagrams, this is the size of
the largest network datagram that can be sent on the interface
Integer
Read-only
Last Change This field indicates the time of the last change on the port.
Read-only
Interface Parameters

To configure FR interface parameters:
1. In the LA-110 Node Draw, select the Data FR port, right-click and select
Configure > FR Interface > Interface Parameters.