User`s manual

Chapter 4 Port Configuration and Monitoring 5620 Model Descriptor for LA-110 User’s Manual
4-6 Data Port Configuration
Table 4-1. Data Port Application Parameters
Parameter Remarks
Port The selected port
Read-only
Port Application The protocol application which runs above the physical port.
Frame Relay, AAL1 Stream
Data FR Application Mode
When the LA-110 Data port is configured to support Frame Relay services, the
traffic is carried over AAL5, per the selected ATM service category. You can define
the desired ATM connection parameters in accordance with the application
requirements.).
The number of supported DLCIs (Data Link Connection Identifiers) is 16, and the
allowed range is 16 through 991.
Basic tasks include viewing and configuring:
 Interface information
 Interface parameters
 VC signaling information
 Loopback testing.
Interface Information

To view FR interface information:
• In the LA-110 Node Draw, select the Data FR port, right-click and select
Configure > FR Interface > Interface Info.