User`s manual
5620 Model Descriptor for LA-110 User’s Manual Chapter 4 Port Configuration and Monitoring
Viewing Port Parameters 4-3
Figure 4-3. Navigator showing Ports
4.2 Performing Port Operations
To perform operations on ports:
• In the Port Draw or Navigator, right-click on the selected port, and choose
any of the shortcut menu options.
4.3 Viewing Port Parameters
When focusing on a LA-110 port, you can view its parameters. (Instructions for
configuring the specific LA-110 ports appear in the following sections in this
chapter.)
To view port parameters:
1. In the LA-110 Node Draw, focus on the desired unit port.
2. Right-click on the port and select the relevant shortcut menu options:
For the Data port,
select Configure > FR Interface > Interface Parameters
For the SHDSL port,
select Configure > Physical Layer or ATM Layer > Parameters
For the E1 CES port,
select Configure > Parameters
For the LAN port,
select Configure > Interface Parameters