User`s manual
Chapter 3 System Configuration and Monitoring 5620 Model Descriptor for LA-110 User’s Manual
3-24 Managing System Faults
Table 3-11. System Log Buffer Parameters
Parameters Possible Values / Remarks
System Log
Table
Number
The row's sequence number.
Read-only
Interface
The inteface.
VPI
Appears when relevant
Read-only
VCI
Appears when relevant
Read-only
Description
Description of the event or alarm
Status
The system history alarm status
On, Off, Event
Date & Time
The date and time the history alarm occurred.
String: YYY-MM-DD, hh:mm:ss
Clearing the History Log
This section discusses how to use LA-110 MD to clear the history log in the log
buffer of the LA-110 node.
To clear the history log:
1. In the LA-110 Node Draw, select the system (as described in Selecting the
System), and from the menu bar, select
Action > Perform Action > Clear History Log.
Figure 3-16. Clear History Log Confirmation Dialog Box
2. Click <Yes> to clear all the entries in the Log Buffer.
The Agent resets the variable to Off after clearing the Log Buffer.