User`s manual

5620 Model Descriptor for LA-110 User’s Manual Chapter 3 System Configuration and Monitoring
Managing System Faults 3-21
Figure 3-13. System Preferences
2. Enter the Web browser path. The default Web browser path is:
/usr/dt/bin/netscape.
If Mozilla is used, then change to the path where Mozilla is usually installed:
/usr/local/bin/mozilla
3. Enter the help file path. The default help file path is:
/opt/netmgt/documentation/RAD/LA110/LA110_R2_Descriptor_Help.htm
The title bar at the top of the Configure Preferences window will show the
System Name, the IP address of the node, and the name of the form as
follows:
LA-110 - IP Address - Configure Preferences
4. Click <Save> to save the changes.
3.12 Managing System Faults
This section discusses how to monitor system alarms, using LA-110 MD.
Viewing Active Alarms
LA-110 MD allows you to monitor active alarms in the LA-110 node.

To view active alarms in the LA-110 node:
• In the LA-110 Node Draw, select the system (as described in Selecting the
System), and from the menu bar, select
Monitor > All Active Alarms
A Monitor form appears, displaying currently active alarms as shown in
Figure 3-14.