User`s manual
Chapter 3 System Configuration and Monitoring 5620 Model Descriptor for LA-110 User’s Manual
3-16 Viewing ATM to FR IWF Settings
3.8 Viewing ATM to FR IWF Settings
You can select the Frame Relay interworking mode: network interworking per
FRF.5 or service interworking per FRF.8.
• The network interworking mode, defined in FRF.5, is used to interconnect
Frame Relay equipment through an ATM network. You can configure the way
the Frame Relay traffic control parameters are converted to the cell loss
priority (CLP) indicator used on the ATM connection, and back.
• Service interworking mode, defined in FRF.8, is used to interconnect an
equipment unit with Frame Relay interface to an equipment unit with ATM
interface.
To view the ATM to FR IWF Table:
1. In the LA-110 Node Draw, select the system (as described in Selecting the
System), and from the menu bar, select
Object > Configure > ATM to FR IWF Table.
Figure 3-10. ATM to FR IWF Table
2. View the fields, as described in Table 3-8.