User`s manual

5620 Model Descriptor for LA-110 User’s Manual Chapter 3 System Configuration and Monitoring
Selecting AAL1 3-15
Table 3-7. Manager List Parameters (Cont.)
Parameter Valid Ranges/Remarks
Error Ex. Ratio Affects the ds1ExcessiveErrorRatio trap
Unmasked, Masked
Frame Ex. Sli Affects the ds1ExcessiveFrameSlip trap
Unmasked, Masked
E1 Ex. Loc. MF
Alr.
Affects the ds1ExcessiveLocalMfAlarm trap
Unmasked, Masked
E1 Ex. Rem. MF
Alr.
Affects the ds1ExcessiveRemoteMfAlarm trap
Unmasked, Masked
E1 Ex. Loc. Sync
Loss
Affects the ds1ExcessiveLocalSyncLoss trap
Unmasked, Masked
E1 Ex. Rem.
Sync Loss
Affects the ds1ExcessiveRemoteSyncLoss trap
Unmasked, Masked
3.7 Selecting AAL1
The AAL1 mode selection option is only available if the system is set to AAL2 mode.

To view and modify the Manager List:
1. In the LA-110 Node Draw, select the system (as described in Selecting the
System), and from the menu bar, select
Object > Configure > AAL1 Selection.
Figure 3-9. AAL1 Dialog Box
2. From the Selected Layer drop-down list, choose <AAL1>.
3. Click <Save> to save the changes.
Note