User`s manual

Chapter 3 System Configuration and Monitoring 5620 Model Descriptor for LA-110 User’s Manual
3-12 Viewing and Modifying the Manager List
2. In the Manager List Table (located at the top), select the general mask modes
(per row entry), by selecting the relevant options from the drop-down lists. The
options include: Manual Mask, Mask All Traps, Mask Only Alarm Traps,
Unmask Alarm Traps.
3. In the Trap Mask Configuration Table, you can manually select the masking
settings per specified traps. In the relevant Traps fields, from the drop-down
lists, choose <Masked> or <Unmasked>. (The default trap value is
"Unmasked").
4. View the fields, as described in Table 3-7.
5. Click <Save> to save the changes.
The only changeable parameters in the Manager List are the Masking Traps.
Table 3-7. Manager List Parameters
Parameter Valid Ranges/Remarks
Manager List Table
Manager ID The manager ID.
1…10
Read-only
IP Address When adding a row, this parameter is read-write and has a range of 0.0.0.0 to
255.255.255.255
Read-only
General Mask
Mode
The general mask mode
• Manual Mask: The traps in the Trap Masking Mode Table can be configured manually
• Mask All Traps: All the traps in the Trap Masking Mode Table will be masked
• Mask Only Alarm Traps: Only the Alarm Traps in the Trap Masking Mode Table will
be masked
• Unmask Alarm Traps: The Alarm Traps in the Trap Masking Mode Table will be
unmasked
Trap Masking Configuration Table
Agn Stat. Affects the agnStatusChangeTrap
Unmasked, Masked
TFTP Stat. Affects the tftpStatusChangeTrap
Unmasked, Masked
Auth. Fail Affects the authenticationFailure trap
Unmasked, Masked
Note