User`s manual

Chapter 3 System Configuration and Monitoring 5620 Model Descriptor for LA-110 User’s Manual
3-8 Viewing and Modifying Traffic Descriptor Settings
• Changing the properties of the management channel disconnects the NMS from
the Agent.
• SNMP VPI and VCI cannot both be set to zero.
• When working with a full bandwidth G.732s or G.732n E1-CES connection, you
may experience problems managing the device when Shaping is set to HW
mode. In this case, the workaround is to set the device to work in SW Shaping
mode.
3.5 Viewing and Modifying Traffic Descriptor Settings
The Traffic Descriptor window allows you to configure different settings for traffic
parameters, and use these settings in multiple connections.

To configure the traffic descriptor:
1. In the LA-110 Node Draw, select the system (as described in Selecting the
System), and from the menu bar, select
Object > Configure > Traffic Descriptor.
Figure 3-6. Traffic Descriptor
2. Fill in the fields, as described in Table 3-4.
Table 3-4. Traffic Descriptor Table Parameters
Parameter Valid Ranges/Remarks
Traffic
Descriptor
Table
Index
1-200
Read-only
When adding a row, this parameter is read-write.
Notes