User`s manual

Chapter 3 System Configuration and Monitoring 5620 Model Descriptor for LA-110 User’s Manual
3-4 Viewing and Modifying System Information
3. Click <Save> to save the changes in the NMS.
If there is active communication with the Agent, the NMS gets and saves
within its database the parameters, as described in Table 3-1.
If there is no communication with the Agent, the parameters listed in
Table 3-1 are displayed according to the values existing in the NMS
database. The NMS will issue warnings about other parameters' values that
are not obtainable.
Table 3-1. System Information Parameters
Parameters Possible Values / Remarks
Description Description of the entity, including the full name and version identification of the system's
hardware type and operating system.
Read-only
Object ID Object identifier. Identifies the network management subsystem contained in the entity.
This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an
easy and unambiguous means for determining 'what kind of box' is being managed.
Read-only
Name Name of the managed node.
String of up to 36 characters.
By convention, this is the node's product name.
Contact Name of contact person for this managed node, together with information on how to
contact this person.
String of up to 32 characters.
Location Physical location of this node.
String of up to 32 characters.
System Up
Time
Time since the system was last re-initialized.
Format:
d: days, hh:mm:ss
Read-only
Date & Time The following are the system date and time parameters. When you choose the month,
day, and year, and click <Save>, the NMS checks validity of the specified value. If an
invalid value is entered, a warning message is issued in the status bar: "Invalid Date"
without applying change to the system.
Month January - December
Day 1-31
Year 1970 - 2099
Time
Format:
hh:mm:ss
Number of
Interfaces
The number of physical and logical interfaces within this node.
Read-only
Number of
Connections in
Use
The number of physical connections in use.
Read-only