User`s manual

Chapter 2 Getting Started 5620 Model Descriptor for LA-110 User’s Manual
2-12 Using the Graphical User Interface

To launch the Navigator:
• In the Draw application, click the Navigator button.
As shown in Figure 2-11, the Navigator tool facilitates an auto-discovery
block that maps the node, slot and interface into the managed object
hierarchy.
Figure 2-11. Navigator Tool (Collapsed upon Launching)
Configuration Tool
The Configuration tool allows you to configure the SNMP node attributes.
The LA-110 MD determines the basic attributes on the LA-110 node at the system
and port levels.
Monitor Tool
Monitor forms are read-only; they allow 5620 SNMP DM users to monitor the
node’s objects. The LA-110 MD defines which attributes and statistics you can
monitor on the 5620 SNMP DM GUI. Currently, the Monitor tool allows
displaying only active alarms.
Rediscover Tool
The Rediscover tool is available for a number of components to allow you to
explicitly check the population of subcomponents. There is no form associated
with this action and the revised component list is shown on the Navigator form.
•
When using the Rediscovery tool, it is not possible to manipulate other components
until the process ends.
Status Bar
A Status Bar is located on every form (or dialog box) of the LA-110 MD
application.
The Status bar displays various error messages, such as "Node not responding’,
"General error" etc., and rediscovery indication.
Note