User`s manual

Chapter 2 Getting Started 5620 Model Descriptor for LA-110 User’s Manual
2-10 Using the Graphical User Interface
Card Status (only in 5620 Shelf View)
Card status is indicated by the following colors:
Gray: Normal
Red: All the other cases (alarm is present)
Card Status will be determined according to status of the port in this card:
If the port on a card is Faulty: the card is colored red.
Else – if the port is faulty: the card is colored gray.
Port Status
Port status is indicated by the following port colors:
RED: Fault
GREEN: OK
PURPLE: Test/Unknown
(Note that port status is Unknown when both the port status color is Purple
and there is no loopback test running on the port.
Drawing Tool
The 5620 SNMP DM Drawing tool uses data provided by the LA-110 MD to
display a graphical representation of the node’s components and subcomponents
(i.e. LA-110 front and rear panels as shown in Figure 2-10.
Each Drawing Tool module has toolbar buttons that enable the operator to launch
appropriate Configure and Monitor forms for the selected interface.
Context sensitive menus allow you to invoke the Model Descriptor Configuration,
Monitor, or other Forms.
To launch the Draw tool:
1. In the 5620 Network map, right-click on an LA-110 Node icon, and select
Manage Object.
Draw displays a visual image of the managed device, including its
components and their relevant status indications (see Figure 2-10).