User`s manual

Chapter 2 Getting Started 5620 Model Descriptor for LA-110 User’s Manual
2-6 Installation and Setup
Table 2-1. New Node Parameters
Parameters Possible Values / Remarks
Short Name Short name of the new node
String in letters and/or digits.
Full name Full name of the new node.
String in letters and/or digits
Description
Source
The description source.
Qs
Read-only
Config Protocol The configuration protocol.
Qs, NCI
Status
Monitoring via
The status monitoring source.
None, IP, SNMP
PVC Transit Determines whether PVC transit is restricted for the node.
Unrestricted, Restricted
Internet
Address
Interent (IP) address of the node.
6. In the Short Name and Long Name fields, type in the relevant names.
7. Leave the rest of the fields at their default values. (Optional) In the Icon field,
you can select the LA-110 icons. If desired, you can select any other icons.
8. Click <Proceed>.
A warning box opens, prompting you about the creation of the new node,
click <Continue> to proceed.
Figure 2-6. Create New Node Dialog Box
9. In the SNMP Agent IP Address field, type in the IP address of the LA-110
node, and click <Save>.
The SNMP Read and Write Community String dialog boxes open.
10. Enter the relevant SNMP read/write community strings and click <OK>.
After several seconds, an LA-110 icon appears on the 5620 SNMP DM
Network Map.