User`s manual

Chapter 6 Path Management 5620 Model Descriptor for LA-110 User’s Manual
6-6 Configuring and Monitoring ATM VCC Paths
6.2 Configuring and Monitoring ATM VCC Paths
LA-110 MD allows you to configure and monitor ATM VCC paths between the
following endpoints:
• Ethernet ports
• E1 CES ports
• Data FR / AAL1 Stream ports.
LAN to LAN Paths

To configure a path between two LAN (Ethernet) ports:
1. Right-click on the Entire Network Map and select
Create > ATM and TDM > Paths > ATM > VCC.
The new ATM VCC path form opens, in which you can specify the path
endpoints.
Figure 6-7. New ATM VCC Path
2. On the Entire Network Map, double-click an LA-110 icon to open the LA-110
Node shelf view (Figure 6-2).
3. Double-click the LAN port to focus on it – to open its zoom view.
Figure 6-8. Zoom View of LAN Port
4. Select the LAN port to highlight it.
5. In the New ATM VCC Path, click the <Path-endpoint A> button to assign
the port as an endpoint.