User`s manual

Chapter 5 Cross Connection 5620 Model Descriptor for LA-110 User’s Manual
5-28 Performance Monitoring
Table 5-18. AAL1 Stream VC Connection – Loopback Test Parameters
Parameter Remarks
VPI The VPI value of the VC.
0…31
Read-only
VCI The VCI value of the VC.
0…255
Read-only
Loopback Test
Mode
Single, Periodic
Single Mode
Result
OK, Failed
Read-only
Periodic Mode
All fields in this section will be enabled only if Mode=Single.
Loopback
Failure
Indication
Disabled (default), Enabled
Loopback
Failure
Threshold
1 (default)…16
Enabled only if Loopback Fail Indication is enabled
Loopback Test
Status
Activates a loopback test on the specified port.
Off, Running
Read-only
Action Activates a loopback test on the specified port.
Loopback Test, Stop Test
5.3 Performance Monitoring
The LA-110 Navigator application allows you to monitor cross connections and
related performance statistics. Basic tasks include viewing:
OAM loopback statistics
CES VC Connection – OAM loopback statistics
Data FR - OAM loopback statistics
Data AAL1 - OAM loopback statistics.
All of the Performance Monitoring parameters, as shown in the tables below, are
read-only.
Note