User`s manual
5620 Model Descriptor for LA-110 User’s Manual Chapter 5 Cross Connection
Configuring Cross Connections 5-27
Loopback Testing
To configure AAL1 Stream VC connection loopback testing:
1. In the Navigator, select the necessary AAL1 Stream VC connection, right-click
and select Configure > Loopback Test.
Figure 5-16. AAL1 Stream VC Connection – Loopback Test
2. Fill in the fields, as described in Table 5-18.
3. Click <Save> to save the changes.
The result of the Signal Mode test appears six seconds after the "Save"
button is pressed.