User`s manual

Chapter 5 Cross Connection 5620 Model Descriptor for LA-110 User’s Manual
5-26 Configuring Cross Connections
Activating/Deactivating Connection

To activate/deactivate AAL1 Stream VC connections:
1. In the Navigator, select the necessary AAL1 Stream VC connection, right-click
and select Configure > Activate/Deactivate Connection.
Figure 5-15. AAL1 Stream VC Activate/Deactivate Connections
2. Fill in the fields, as described in Table 5-17.
3. Click <Save> to save the changes.
Table 5-17. Activate/Deactivate AAL1 Stream VC Connections Parameters
Parameter Valid Ranges/Remarks
ATM Endpoint
VPI The VPI value of the VC.
0…31
Read-only
VCI The VCI value of the VC.
0…255
Read-only
Operational
Status
Up, Down