User`s manual

Chapter 5 Cross Connection 5620 Model Descriptor for LA-110 User’s Manual
5-24 Configuring Cross Connections
Table 5-15. FR VC Connection – Loopback Test Parameters
Parameter Remarks
VPI The VPI value of the VC.
VCI The VCI value of the VC.
Read-only
Loopback Test
Mode
Single, Periodic
Single Mode
Result
OK, Failed
Read-only
Periodic Mode
All fields in this section will be enable only if Mode=Single.
Loopback
Failure
Indication
Disabled (default), Enabled
Loopback
Failure
Threshold
1 (default)…16
Enabled only if Loopback Fail Indication is enabled
Loopback Test
Status
Activates a loopback test on the specified port.
Off, Running
Read-only
Action Activates a loopback test on the specified port.
Loopback Test, Stop Test
AAL1 Stream VC Connections
Basic tasks include viewing and configuring:
• Connection information
• Activate/Deactivate connection
• Loopback testing.
Connection Information

To view AAL1 Stream VC connection information parameters:
• In the Navigator, select the AAL1 Stream VC Connections container, right-
click and select Configure > Connections Info.