User`s manual

Chapter 5 Cross Connection 5620 Model Descriptor for LA-110 User’s Manual
5-18 Configuring Cross Connections
2. Fill in the fields, as described in Table 5-11.
3. Click <Save> to save the changes.
Table 5-11. Activate/Deactivate CES VC Connections Parameters
Parameter Valid Ranges/Remarks
ATM Endpoint
VPI The VPI value of the VC.
0…31
Read-only
VCI The VCI value of the VC.
0…255
Read-only
CES Endpoint
Bundle ID Used to assist the NMS in selecting a value for the bundle index.
1-31
Read-only
Connection
Connection
Status
Up, Down
Loopback Testing

To configure CES VC connection loopback testing:
1. In the Navigator, select the CES VC Connections container, right-click and
select Configure > Loopback Test.