User`s manual

5620 Model Descriptor for LA-110 User’s Manual Chapter 5 Cross Connection
Configuring Cross Connections 5-17
Table 5-10. Unframed CES VC Connections Info Parameters (Cont.)
Parameter Valid Ranges/Remarks
Bundle Used to assist the NMS in selecting a value for the bundle index.
1-31
Read-only
Continuity Check The VCC admin status.
Off Two Way (down), On Two Way (up), On-source, On-sink
Read-only
Rx
10…47
Read-only
Tx
10…47
Read-only
Last Change This field indicates the time of the last change on the port.
Read-only
Activating/Deactivating Connection

To activate/deactivate CES VC connections:
1. In the Navigator, select the necessary CES VC connection, right-click and
select Configure > Activate/Deactivate Connection.
Figure 5-9. CES VC Activate/Deactivate Connections